Stud mounting bracket, plastic
Goes on the stud and connects inlet valve with the piping. (030013)
|
Stud mounting bracket, metal
Goes on the stud and connects inlet valve with the piping. Steel (025030)
|
90° Sharp Elbow (dual)
Only used behind the inlet valves (030020)
|
|
90° sweep elbow
Standard sweep elbow. (030120);
|
90° sweep tee
Connects piping from two inlets. (030140);
|
90° Dual Sweep Elbow
Connects piping from opposite directions. (030024)
|
|
45° Elbow
Elbow used to change direction of piping. (030110);
|
Stop coupler
Connects two pieces of pipe. (030145);
|
Pipe hanger clamp
Used to hold piping in place. (030172)
|
|
Plaster guard
Used with metal mounting bracket in new constructions. (030015)
|
Short Tee
Used when there is an inlet on both sides of the wall. (030025)
|
Inlet valve extension
Used to hold piping in place. (030010)
|
|
Vacpan Stub-in Kit
Makes installation of a vacpan easy. (040035)
|
45° Y
Connects piping from two inlets. (030151)
|
30° elbow
Elbow used to change direction of piping. (030107)
|
|
Pipe cap
Seals open end of piping. (030155)
|
Dress up Collar
(030160)
|
Floor mounting adapter
Used when the inlet valve is installed in the floor. (030030)
|
|
Exhaust vent cap
Used when the exhaust air is vented to the outside. (030156)
|
Metal Half Saddle
Holds piping in place
|
Round Cover Plate
Covers gaps between piping and wall.
|